Products

SD COMPONENTS TOPLOAD BLACK STEM The SD Components TopLoad Black stem is the perfect component for securing the handlebar of your BMX Race bike. This stem is available in two different sizes, providing two lengths to allow you to customize the dimensions of your...

Attention, only compatible with SD-X HSX Expert Sniper hubs. Lightweight, aluminum cog for Expert HSX Sniper hub. Available in 14T - 19T 14T: 10g 15T: 14g 16T: 17g 17T: 18g 18T: 22g 19T: 24g

Together with SD BMX Components we have been able to develop this beautiful SD-X HSX Sniper hub with what the name says, specifically for the Meybo HSX Frames. Both for the aluminum and carbon frames. The SD-X Sniper HSX hub is a full engagement...

The SD-X Sniper Evo Air Front Hub is engineered for lightweight racers who demand maximum performance, precision, and reliability. Designed specifically for BMX racing, this hub combines ultra-lightweight aluminum construction with titanium bolts and high-end SKF ABEC-5 bearings, resulting in an exceptionally fast and...

The SD-X Sniper Evo Air Front Hub is engineered for lightweight BMX racers who demand maximum performance, precision, and reliability on the track. Purpose-built for BMX racing, the Evo Air combines ultra-lightweight 7075 aluminum construction with titanium hardware and premium SKF ABEC-5 bearings to...

Every SD-X Sniper Evo front Hub is fitted with two end caps, which seal the bearings and give the hub a clean, refined appearance. The left and the right end cap for de Sniper Evo Air front hub are identical.Pay attention, The end caps...

The SD-X Sniper Evo Air Front Hub is equipped with two end caps, each fitted with an O-ring. Over time, these O-rings may require replacement to maintain proper sealing and optimal hub performance. This product is offered as a replacement O-ring set to ensure...

The SD-X Sniper Evo Hubs are equipped with a premium SKF Explorer bearings, this one specifically used as the Evo Air Front wheel bearings.Manufactured from high-purity chromium bearing steel (100Cr6 / AISI 52100) and fitted with precision-ground, hardened steel balls, this bearing is designed to handle high loads while maintaining low...

The SD-X Sniper Evo Air HSX Rear Hub is engineered specifically for lightweight BMX racers using Meybo HSX Alloy and Carbon frames. Designed to maximize acceleration, efficiency, and responsiveness, this ultra-light full-engagement rear hub combines premium 7075 aluminum construction with high-end SKF ABEC-5 bearings...

The SD-X Sniper Evo Air Rear Hub is equipped with a single clutch bearing. This product is a direct replacement clutch bearing for your Sniper Air (HSX) Rear hub.The high-quality clutch bearings used in SD-X Sniper Evo Air rear hubs are engineered to withstand...

The SD-X Sniper Evo Air Hub Driver is available as a replacement driver for your existing Sniper Evo Air rear hub. The driver is manufactured from high-quality aluminum and reinforced with a steel bushing. This carefully balanced material combination provides an ideal weight distribution.This...

The SD-X Sniper Evo Air Rear Hub is engineered for lightweight BMX racers seeking maximum efficiency, instant engagement, and ultra-responsive acceleration. Designed for elite BMX racing, this full-engagement rear hub combines lightweight 7075 aluminum construction with premium SKF ABEC-5 bearings to deliver explosive starts...

The SD-X Sniper Evo Air HSX Rear Hub is designed specifically for lightweight racers using Meybo HSX frames. This full-engagement rear hub combines lightweight aluminum construction with SKF ABEC-5 bearings, ensuring maximum efficiency and reliability in BMX racing.The advanced direct engagement system provides immediate...

The SD-X Sniper Evo Cog is precision-engineered from high-grade 7075 aluminum and specifically designed for use with SD-X Sniper Evo rear hubs. Built for BMX racing at the highest level, this cog delivers exceptional strength, efficiency, and reliabilityIts unique 6-lug interface ensures optimal load...

The SD-X Sniper Evo Bearing CR Clip secures bearings with precision and stability. Engineered for durability and a perfect fit, it ensures smooth, reliable hub performance.

The SD-X Sniper Evo Bolt Caps are designed to give hub-mounted bolts a clean and refined finished appearance once installed in the hub. In addition to their aesthetic function, they contribute to a premium, professional look of the complete wheel setup.The bolt caps are...

The 1 mm SD-X Sniper Cassette Spacer is designed to precisely align the cog and fill the required space, ensuring the cog is securely locked onto the driver when used in combination with the lockring.Manufactured from high-quality 7075 aluminum, this spacer offers excellent durability and a...

SD-X Sniper Evo Clutch Bearing Grease delivers superior lubrication and long-lasting protection for clutch bearings. Formulated for smooth engagement, reduced friction, and reliable performance under extreme conditions.

The SD-X Sniper Evo Hubs are equipped with a premium SKF Explorer bearings, this one specifically used as the Driver Inner Bearing.Manufactured from high-purity chromium bearing steel (100Cr6 / AISI 52100) and fitted with precision-ground, hardened steel balls, this bearing is designed to handle high loads while maintaining low friction.Its optimized...

The SD-X Sniper Evo Hubs are equipped with a premium SKF Explorer bearings, this one specifically used as the Driver Outer Bearing.Manufactured from high-purity chromium bearing steel (100Cr6 / AISI 52100) and fitted with precision-ground, hardened steel balls, this bearing is designed to handle high loads while maintaining low friction.Its optimized...

Every SD-X Sniper Evo Rear Hub is fitted with two end caps, which seal the bearings and give the hub a clean, refined appearance. This product is the left-side end cap, specifically designed for use with the Sniper Evo Pro and Sniper Evo Air...

Whether you are replacing your existing Sniper lockring or updating your SD-X Sniper rear hub with a fresh new color, this lockring is the ideal choice. Manufactured from high-quality 7075 aluminum, the SD-X Sniper Lockring securely holds the cog in place, ensuring reliable retention...

The SD-X Sniper Evo Air Front Hub is designed for lightweight BMX racers seeking the ultimate combination of low weight, precision steering, and race-day responsiveness. Built specifically for high-level BMX competition, the Evo Air pairs premium 7075 aluminum construction with titanium hardware and ultra-smooth...

The SD-X Sniper Evo Pro Front Hub is engineered for BMX racers who demand uncompromising performance, precision, and reliability at the highest level of competition. Designed to handle the extreme loads of modern BMX racing, the Evo Pro combines lightweight construction with premium materials...

The SD-X Sniper Evo Pro Front Hub Conversion Kit is designed to convert the Sniper Evo Pro front hub from a 20 mm thru-axle configuration to a 10 mm bolt-in setup.Sniper Evo Pro front hubs are supplied as standard in a 20 mm configuration....

Every SD-X Sniper Evo front Hub is fitted with two end caps, which seal the bearings and give the hub a clean, refined appearance. The left and the right end cap for de Sniper Evo Pro front hub are identical.Pay attention, The end caps...

The SD-X Sniper Evo pro Front Hub is equipped with two end caps, each fitted with an O-ring. Over time, these O-rings may require replacement to maintain proper sealing and optimal hub performance. This product is offered as a replacement O-ring set to ensure...

The SD-X Sniper Evo Hubs are equipped with a premium SKF Explorer bearings, this one specifically used as the Evo Pro Front wheel bearings.Manufactured from high-purity chromium bearing steel (100Cr6 / AISI 52100) and fitted with precision-ground, hardened steel balls, this bearing is designed to handle high loads while maintaining low...

The SD-X Sniper Evo Pro HSX Rear Hub is engineered specifically for Meybo HSX Alloy and Carbon frames, delivering uncompromising BMX race performance with a full-engagement direct drive system optimized for elite-level competition. Designed exclusively around the Meybo HSX platform, the Evo Pro HSX...

The SD-X Sniper Evo Pro Rear Hub is equipped with a two clutch bearings. This product is a direct replacement clutch bearing kit for your Sniper Pro (HSX) Rear hub.The high-quality clutch bearings used in SD-X Sniper Evo Pro rear hubs are engineered to...

The SD-X Sniper Evo Pro Rear Hub is engineered for BMX racers who demand uncompromising performance, instant engagement, and maximum reliability under elite-level race conditions. Designed for riders who accept no limits, this full-engagement rear hub delivers immediate acceleration response, silent operation, and zero...

The SD-X Sniper Evo Rear Hub Conversion Kit 10 mm Kit is designed to convert the Sniper Evo Rear Pro hub from a 15 mm thru-axle configuration to a 10 mm bolt-in setup.Sniper Evo Pro rear hubs are supplied as standard in a 15...

The SD-X Sniper Evo Rear Hub Conversion Kit 15 mm Kit is designed to convert the Sniper Evo Rear Air hub from a 10 mm bolt-in configuration to a 15 mm thru-axle setup.Sniper Evo Air rear hubs are supplied as standard in a 10...

Every SD-X Sniper Evo Rear Hub is fitted with two end caps, which seal the bearings and give the hub a clean, refined appearance. This product is the left-side end cap, specifically designed for use with the Sniper Evo Pro and Sniper Evo Air...

Every SD-X Sniper Evo Rear Hub is fitted with two end caps, which seal the bearings and give the hub a clean, refined appearance. This product is the right-side end cap, specifically designed for use with the Sniper Evo Pro (HSX) and Sniper Evo...

The SD-X Sniper Evo Rear Hubs are equipped with two end caps, each fitted with an O-ring. Over time, these O-rings may require replacement to maintain proper sealing and optimal hub performance. In addition to the end cap O-rings, the driver assembly also contains an O-ring, which...

The SD-X Sniper Evo Hubs are equipped with a premium SKF Explorer bearings, this one specifically used as the Evo rear wheel bearings.Manufactured from high-purity chromium bearing steel (100Cr6 / AISI 52100) and fitted with precision-ground, hardened steel balls, this bearing is designed to handle high loads while maintaining low friction.Its...

The SD Sniper Titanium Bolts Set consists of two high-performance titanium bolts, designed for applications where maximum strength, low weight, and corrosion resistance are essential. Featuring an 8 mm Allen (hex) head and UNC 3/8-16 threading, these bolts are ideal for use in your...

Attention:Only compatible with SD-X Sniper hubs 2025 and prior The SD-X Sniper cassette cog is a durable steel cog designed specifically for SD-X Sniper Junior, Expert, and Pro cassette hub systems. Built for BMX racing applications, these cogs provide reliable engagement, long service life,...

The SD-X Sniper Evo Pro Hub Driver is available as a replacement driver for your existing Sniper Evo Pro rear hub. The driver is manufactured from high-quality steel for long time use.This driver has been specifically engineered for the SD-X Sniper Evo Pro (HSX)...

The SDG Fly Jr Saddle is designed to provide young riders with all-day comfort, efficient pedaling support, and improved riding control. Featuring a lightweight performance shape with rider-focused ergonomic features, the Fly Jr is ideal for BMX, MTB, and youth performance riding applications. The...

SEATPOST REDUCER 26.8 to 22.2 seat post and 25.4. Works with Avent and Orca frames and most of USA made frames with 26.8 seat post diameter. 

360 degree ankle support Lace up fit

Lightweight knee protection with moulding foam S: 15''-17'' (38-43cm), M: 17''-19'' (43-48cm), L: 19''-21'' (48-53cm), XL: 21''-23'' (53-58cm) Take measurement 6'' above knee cap when leg is bent at 90 degrees

Lightweight knee protection with moulding foam S: 15''-17'' (38-43cm), M: 17''-19'' (43-48cm), L: 19''-21'' (48-53cm), XL: 21''-23'' (53-58cm) Take measurement 6'' above knee cap when leg is bent at 90 degrees

High-length compression design to prevent pad from slipping Extra side knee padding for increased protection Silicone printed gripper on inside of cuffs Silicone printed logo on top and bottom outside cuffs to grip silicone on to shorts Mesh back for increased airflow Pre-curved fit...

SHIMANO's SM-RTAD05 disc brake rotor adaptor is used for installing a 6-bolt disc brake rotor to CENTER LOCK hub. The adapter features a reliable anti-loosen plate for secure braking in all riding conditions. Cannot be used with the 6-bolt disc brake rotor that is...

This brake Hose End is specifically made for Shimano's BH90 brakes. It screws on tight, replacing the original.

SHIMANO DEORE - Hydraulic Disc Brake Lever - I-SPEC EV Rear (right side) With quicker brake engagement and shorter free stroke, the SHIMANO DEORE BL-M6100 brake lever delivers intuitive braking so you can stay focused on the trail ahead. The I-SPEC EV shift lever...

The SHIMANO BL-RS600 is a hydraulic disc brake lever with a comfortable 3-finger lever and a braking power curve optimized for daily use. It is compatible with SL-RS700 and SL0RS405 shift levers.